3. Save the settings as a preset.
Procedure
1.
Press [▶] to select "YES".
PRINT-CUT ADJ.
SET [NEXT]
2.
Press [ENTER] to confirm your entry.
3.
Press [▶] to select "NEXT".
CROP-CUT ADJ.
SET [NEXT]
4.
Press [ENTER] to confirm your entry.
5.
Press [◀] to select "SAVE".
PRESET
[SAVE]
6.
Press [ENTER] to confirm your entry.
If you select "NEXT" and press [ENTER], the screen in step 10 is displayed and the settings you have
selected up to this point are not saved as a preset. However, they will remain as the current set-
ting values for the machine.
7.
Press [▲] or [▼] to select a destination to save the preset.
You can select a name from "NAME1" to "NAME8".
SAVE TO
NAME1
8.
Press [ENTER] to confirm your entry.
9.
Set the name.
(1)
Press [▲] or [▼] to select a character.
(2)
Press [▶] to move to the next character.
(3)
Set the following characters in the same way.
You can enter up to15 characters.
SET NAME
10.
Press [ENTER] to confirm your entry.
COMPLETED
11.
Press [MENU] twice to go back to the original screen.
This completes the operation of the "MEDIA SETTING" menu.
NEXT
Cutting Output
91
Cutting Method