Cutting with Crop Marks
Step 1: Batch Settings for Cutting with Crop Marks
To ensure the optimal output according to the media size and type, you can configure various settings on
this machine. However, it is hard work to configure these settings one at a time. You can use the "MEDIA
SETTING" menu to configure the absolute minimum of necessary items as a batch. You can save the setting
details as a preset.
Note that you can set all the items set here individually as well.
1. Start the "MEDIA SETTING" menu.
Procedure
1.
Load the media.
P. 30Setup of Media
Check that the media is not sagging. If any sagging exists, settings such as the correction values
will not function effectively.
2.
Press [MENU].
3.
Press [ENTER].
MENU
MEDIA SETTING
If you want to cancel the batch settings before they are completed, see the following page.
RELATED LINKS
・
P. 134Canceling Batch Settings before They Are Completed
How to Cut with Crop Marks
121