The Printer Unit Does Not Run; Is The Power Switched On; Is [Setup] Lit; Are Any Covers Open - Roland TrueVIS MG-640 User Manual

The printer unit does not run

Is the power switched on?

Switch on the printer's main power, and then press the sub power switch and make sure the sub power
switch lights.
RELATED LINKS
・
P. 25Turning the Power On

Is [SETUP] lit?

Output is not performed when [SETUP] is not lit. After loading the media, lower the loading lever, and
then press [ENTER].
RELATED LINKS
・
P. 82Starting Output

Are any covers open?

Close the front, left, and right covers and the rear UV shield.

Is the top menu displayed?

Top menu
W 1600mm
If the top menu isn't displayed, output doesn't start even when data is sent from the computer. To go to
the top menu, press [MENU].
RELATED LINKS
・
P. 82Starting Output

Is [PAUSE] lit?

When [PAUSE] is lit, operation is paused. To resume, press [PAUSE]. [PAUSE] turns off and output resumes.
RELATED LINKS
・
P. 66Pausing and Canceling Output

Is a message displayed on the screen?

RELATED LINKS
・
P. 332Messages
327
Machine Problems