Loading And Outputting A Preset - Roland TrueVIS MG-640 User Manual

Using Presets

Loading and Outputting a Preset

Load a saved preset from among the eight types of presets, and then perform the setup of the media.
Procedure
1.
Press [MENU].
2.
Press [▼] to display the following screen.
MENU
PRESET
3.
Press [▶], then [▼][▶] to display the screen shown below.
LOAD
NAME1
4.
Select the preset that you want to load.
(1)
Press [▲] or [▼] to select the name of the preset you want to load.
(2)
Press [ENTER] to confirm your entry.
When the setup of the media has been performed, the screen shown below appears.
Press [ENTER] again to confirm your entry.
PRESS ENTER KEY
TO SET UP
5.
Press [ENTER].
198
Optimizing Work Efficiency