Basic Maintenance Knowledge
Measures When the Printer Is Not in Use for a Prolonged Period
Be sure to follow the instructions shown below when the printer is not in use for a prolonged period.
• Empty the drain bottle.
If you know that you will not use the machine for a prolonged period, empty the drain bottle. When
the main power is on, the machine periodically performs automatic maintenance in which fluid is dis-
charged.
The drain bottle is filled when the following periods elapse. To perform automatic maintenance, dis-
card the discharged fluid during these periods.
• Approximately 3 weeks after the message "EMPTY DRAIN BOTTLE" is displayed
• Approximately 300 days after the drain bottle is emptied
• Switch the sub power on once every two weeks.
Switch the sub power on once every two weeks. Check for notifications and perform the required
maintenance.
• Keep the machine at a constant temperature and relative humidity.
Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a rela-
tive humidity of 20 to 80% (with no condensation). Failure to do so may result in malfunction.
RELATED LINKS
・
P. 252If the Discharged Fluid Disposal Message Appears
224
Introduction