Making Sure To Verify The Setting For The Amount Remaining Every Time The Media Is Changed; Media Is Changed - Roland TrueVIS MG-640 User Manual

Managing the Operations Appropriately and Efficiently
Making Sure to Verify the Setting for the Amount Remaining Every Time the

Media Is Changed

Set the machine to display the amount of media remaining every time the media is changed.
Setting this menu item to "ENABLE" can keep you from forgetting to redo the setting when you change the
media. However, be sure to also set the "EDGE DETECTION" menu item to "ENABLE".
P. 152Disabling Detection of the Edges of the Media
When "EDGE DETECTION" is set to "DISABLE", "SET LENGTH" is not displayed automatically.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the following screen.
MENU
SHEET REMAIN
3.
Press [▶], then [▲] to display the screen shown below.
SHEET REMAIN
SET LENGTH
4.
Press [▶] to display the following screen.
AUTO DISPLAY
DISABLE DISABLE
5.
Press [▲] or [▼] to select "ENABLE".
AUTO DISPLAY
DISABLE ENABLE
6.
Press [ENTER] to confirm your entry.
If you select "ENABLE", you must set the "EDGE DETECTION" menu item to "ENABLE".
7.
Press [MENU] to return to the original screen.
MEMO
Default setting: "DISABLE"
RELATED LINKS
・
P. 152Disabling Detection of the Edges of the Media
208
Optimizing Operation Management