Table of Contents
Advertisement
MEDIA GAP ADJ.
TEST PRINT
10.
Press [ENTER].
Printing of the test pattern starts.
11.
Check the test pattern to see whether the correction was successful.
Check that the misalignment is minimized for the two vertical lines indicated by "
current correction value). If the misalignment is smaller for another set of vertical lines, set the
correction value again.
12.
When you have successfully performed the correction, press [MENU] to go back to the original screen.
Accurately Adjusting the Settings for Printing and Cutting
" (that is, the
Optimizing the Output Quality
169
Advertisement
Table of Contents
