Setting The Date And Time - Security Command XR200 User Manual

Setting the Date and Time

User Code Level: 8 and above.
Function: Allows you to change the current date and time displayed
on the Security Command keypad and used by the system to log
events in its Event Memory program, and control schedules.
Setting the System's Date and Time
1. Access the User Menu.
2. Press COMMAND until TIME? displays. Press any Select key.
3. The keypad displays the current day and time. Press the
COMMAND key. The keypad displays the current date. Press
the COMMAND key to make any changes.
4. The keypad displays TIME DAY DATE.
5. Press the Select key under TIME to change the time. The
keypad displays – :
select AM or PM.
The display changes back to TIME DAY DATE.
6. Press the Select key under DAY to change the day of week.
The keypad displays SUN MON TUE WED. If the current day
of the week is not displayed, press the COMMAND key.
28
AM PM. Enter the current time and
7. The keypad displays THU
under the correct day. You can use the Back Arrow key to
toggle between the two day of the week displays.
8. Press the Select key under DATE to change the date. The
keypad displays
MONTH:- 1 or 2 digits for the month. Press COMMAND.
DAY:- Up to 2 digits for the day. Press COMMAND.
YEAR:- Up to 2 digits for the year. Press COMMAND.
The display returns to the TIME DAY DATE display. Press the Back
Arrow key to exit the User Menu.
XR200 User's Guide
FRI SAT. Press the Select key
User Menu