Frequently Asked Questions - Security Command XR200 User Manual

Frequently asked questions

This section of the user's guide attempts to answer questions you might have regarding the operation of your Security Command
system.
Q. If I bypass an exit delay door when I arm the system, will I get an alarm if I come through it later?
A. You won't get an alarm from the door because it is bypassed but if you also walk through a motion detector or other armed door inside
the premises you will get an alarm.
Q. When I arm or disarm my Area system, I get ALL? NO YES displayed. Does this mean all areas in the system?
A. Choosing YES arms or disarms all areas that are authorized for your user code.
Q. How do I create a schedule that starts at 8:00 am on Monday and ends at 5:00 PM on Friday.
A. In the days of the week display, select MON (Monday). For the OPENING TIME?, enter 0 + 8 + 0 + 0 AM. For the CLOSING TIME?, at the
MON — : AM PM display press the Select key under MON; this scrolls through the days of the week. Stop at the day you want the schedule
to end. Next, enter 0 + 5 + 0 + 0 PM into the FRI — : AM PM closing time display. Press COMMAND. Press the Back Arrow key to exit the
User Menu.
This sets the opening time to 8:00 AM Monday and the closing time to 5:00 PM Friday. You can substitute any other day or time in this
example.
Q. What do I do if I want to be in the building past the scheduled closing (arming) time?
A. If your system is programmed for Closing Check, the keypad emits a steady tone after the schedule expires and displays "area name"
LATE or CLOSING TIME!. During this display, pressing any Select key displays ENTER CODE: . Enter your user code and press COMMAND.
Your schedule is automatically extended one hour.
The keypad now displays — : AM PM. Enter in the new time you want the schedule to expire and press COMMAND.
The time you enter may extend past midnight by pressing the AM key after the appropriate time has been entered.
Appendix C XR200 User's Guide 47