Area Schedules; Extending Schedules - Security Command XR200 User Manual

Note: You must enter an Opening and Closing time or the system
will not recognize the schedule.
The new schedule is now part of your system.
6. The keypad goes back to the SUN MON TUE WED display
allowing you to enter another schedule.
7. To clear a schedule, press DELETE and then AM when the
opening time is requested.
Press the Back Arrow key to exit the User Menu.

Area Schedules

Your system may be programmed for Area schedules that allows you
to set a separate schedule for each area of the system. If so, after
selecting the schedule type (PRM, PRI, SEC, or TMP) the keypad
displays AREA NO: –. Enter the number of the area you want to
enter schedules. Press COMMAND to continue.
You can also press either of the two left Select keys to browse
through a list of the areas. Press COMMAND when the area name
you want is displayed.
All/Perimeter or Home/Away systems:
programmed for Area schedules that allows you to set a separate
schedule for just the perimeter or interior of the system. If so,
after selecting the schedule type (PRM, PRI, SEC, or TMP) the
keypad displays INT PERIM. Press the Select key under INT to
program a schedule for just the interior of your system. Press
the Select key under PERIM to program a schedule for just the
perimeter.
User Menu

Extending Schedules

User Code Level: 6 and above.
You can extend the schedule to a later time. This allows the
current shift schedule to ignore its closing time and not send a LATE
TO CLOSE! message to the central station. This function allows
workers to stay later and does not extend door access authority.
The extended schedule is erased when it expires.
Extending Schedules at Any Time
Your system may be
Note: If the system is not armed by the scheduled closing time, a
Late to Close report is sent to the central station. If the schedule
is extended, a Schedule Change report is sent.
XR200 User's Guide
1. Access the SCHEDULES? menu. When the schedule options
PRM TMP OUT EXT display, press the Select key under EXT to
extend the schedule.
2. The keypad displays -: AM PM. Enter an extended closing
time and press COMMAND to exit the menu.
Alternatively, you can present your access card to a keypad with
a reader to extend the schedule one hour.
To extend the schedule when the keypad displays AREA LATE or
CLOSING TIME! and the warning sounds to remind users still
present to arm the system or extend the schedule:
1. Press any Select key. The keypad displays ENTER CODE:-.
2. Enter your code and press COMMAND.
schedule is automatically extended one hour.
3. The keypad then displays -: AM PM. You can enter a time
to extend the schedule for any time other than the default
one-hour extension. Press AM or PM.
The system's
25