Extended Schedules; Date And Time; Setting The Date And Time; Extending A Closing Schedule - Security Command XR20 User Manual

Extending Schedules
User Code Level: Master or Standard.
Function: This option allows users to extend today's programmed
closing time schedule.

Extending a Closing Schedule

1. Access the User Menu.
2. Press the COMMAND key until SCHEDULES? displays. Press
any Select key.
3. The keypad displays PRM EXT. Press the Select key under
EXT.
The keypad displays – :
for the closing schedule to expire.
Extending the Schedule at CLOSING TIME! Display
1. Press any Select key. The keypad displays ENTER CODE:-.
2. Enter your code and press COMMAND.
schedule is automatically extended one hour.
3. The keypad then displays -: AM PM. You can enter a time
to extend the schedule for any time other than the default
one-hour extension. Press AM or PM.
Note: If the system is not armed by the scheduled closing time, a
Late to Close report is sent to the central station. If the schedule
is extended, a Schedule Change report is sent.

Date and Time

User Code Level: Master only.
Function: Allows you to change the current date and time
displayed on the keypad and used by the system for schedules and
Display Events.
User Menu
AM PM. Enter in the new time
The system's

Setting the Date and Time

1. Access the User Menu.
2. Press COMMAND until TIME? displays. Press any Select key.
3. The keypad displays the current day and time. press the
COMMAND key.
The keypad displays the current date. Press the COMMAND
key to make any changes.
4. The keypad displays TIME DAY DATE. Press the Select key
under TIME to change the time. The keypad displays – :
AM PM. Enter the current time and select AM or PM.
The display changes back to TIME DAY DATE.
5. Press the Select key under DAY to change the day of the
week. The keypad displays SUN MON TUE WED. If the
current day is not displayed, press the COMMAND key. Press
the Select key under the correct day.
6. Press the Select key under DATE to change the date. The
keypad displays:
MONTH: - Enter one or two digits for the month. Press
COMMAND.
DAY: - Enter up to two digits for the day. Press COMMAND.
YEAR: - Enter up to two digits for the year.
COMMAND.
The display returns to TIME DAY DATE. Press the Back Arrow
key to exit the User Menu.
XR20 User's Guide
Press
23