Setting The Date And Time - Security Command Executive XR200 User Manual

Setting the Date and Time

User Code Level: 8 and above.
Function: Allows you to change the current date and time displayed
on the Security Command keypad and used by the system to log
events in its Event Memory program, and control schedules.
Setting the System's Date and Time
1. Access the User Menu.
2. Press COMMAND until TIME? displays.
3. The keypad displays the current day and time. Press the
COMMAND key. The keypad displays the current date. Press
the COMMAND key to make any changes.
4. The keypad displays TIME DAY DATE.
5. Press the SELECT key under TIME to change the time. The
keypad displays – : AM PM. Enter the current time and select
AM or PM.
The display changes back to TIME DAY DATE.
6. Press the SELECT key under DAY to change the day of week.
The keypad displays SUN MON TUE WED. If the current day
of the week is not displayed, press the COMMAND key.
7. The keypad displays THU FRI SAT. Press the SELECT key
under the correct day. You can use the ARROW key to toggle
between the two day of the week displays.
Setting the Date and Time
User Code Level: 8 and above.
Function: Allows you to change the current date and time displayed
on the Security Command keypad and used by the system to log
events in its Event Memory program, and control schedules.
Setting the System's Date and Time
1. Access the User Menu.
2. Press COMMAND until TIME? displays.
3. The keypad displays the current day and time. Press the
COMMAND key. The keypad displays the current date. Press
the COMMAND key to make any changes.
4. The keypad displays TIME DAY DATE.
5. Press the SELECT key under TIME to change the time. The
keypad displays – : AM PM. Enter the current time and select
AM or PM.
The display changes back to TIME DAY DATE.
6. Press the SELECT key under DAY to change the day of week.
The keypad displays SUN MON TUE WED. If the current day
of the week is not displayed, press the COMMAND key.
7. The keypad displays THU FRI SAT. Press the SELECT key
under the correct day. You can use the ARROW key to toggle
between the two day of the week displays.
8. Press the SELECT key under DATE to change the date. The
keypad displays
MONTH:- Enter one or two digits for the month.
Press COMMAND.
DAY:- Enter up to two digits for the day.
Press COMMAND.
YEAR:- Enter up to two digits for the year.
Press COMMAND.
The display returns to the TIME DAY DATE display. Press the
ARROW key to exit the User Menu.
Note: The date and time portion of the Security Command System
is year 2000 compliant.
8. Press the SELECT key under DATE to change the date. The
keypad displays
MONTH:- Enter one or two digits for the month.
Press COMMAND.
DAY:- Enter up to two digits for the day.
Press COMMAND.
YEAR:- Enter up to two digits for the year.
Press COMMAND.
The display returns to the TIME DAY DATE display. Press the
ARROW key to exit the User Menu.
Note: The date and time portion of the Security Command System
is year 2000 compliant.
27
User Menu
27
User Menu