Door Access Event Displays; Schedule Change Event Displays - Security Command XR200 User Manual

Hide thumbs Also See for XR200:
Table of Contents

Advertisement

Door Access Event Displays

This displays the keypad address where a Door Access occurred and
the user number of the person granted access.
16-Character Display
DOOR
3
024 1017
32-Character Display
ACC
5:18P
10/ 17
3
USER:024
About Door Access
Door Access is a feature available on certain Security Command
keypads that contain a built-in door releasing relay and proximity
readers. When power for an electric door strike or magnetic lock is
connected to the relay's contacts, only users entering a valid user
code can release the lock and gain access to the area.
The Display Events feature logs the user number and name of the
person granted access, the date and time, and from which keypad
they entered their code.
Appendix A
Description
Door (keypad) #3 was accessed
by user 24 on Oct. 17. Press the
Select key under 1017 for the
time of occurrence or under
024 for the user name.
Description
Door (keypad) #3 was accessed
by user 24 at 5:18 PM on Oct.
17. Press the Þ rst Select key
to display Door name where
to access occurred. Press the
second Select key to display
the reason that access was
denied. Press the third Select
key for the name of the device,
or the fourth key for the user
name.
XR200 User's Guide

Schedule Change Event Displays

This displays Changes made to the system's schedules.
16-Character Display
PRM MON 024
1017
32-Character Display
S1
9:41A
10/ 17
MON
USER:024
Schedule Types - There are 4 possible schedule types:
PRM - Permanent
TEMP - Temporary
OUT - Output
EXT - Extend
MON - This is the day of the week in which the schedule change
occurred. The days are displayed using three letters. Press the
Þ rst Select key to display the scheduled Opening time and once
again for the scheduled Closing time.
024 - User number of the person who made the change. Press the
third Select key (the Select key under 024) to display the user's
name.
Description
A
Permanent
schedule
Monday was changed by user
24 on Oct. 17. Press the Select
key under 1017 for the time of
occurrence or under 024 for
the user name.
Description
S1 schedule for Monday was
changed by user 24 at 9:41 AM
on Oct. 17.
for
37

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XR200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents