Security Command XR200 User Manual page 52

Numeric Pager Display
00128- 30 123 40 01 0
Account Message
Number ID
Account Number
This number has been programmed into your Security
Command system as an identiÞ er. Whenever the system
sends a message to your pager, it will always send the
account number Þ rst to identify itself.
Message ID
This is always a single digit that describes the message.
1 = Zone Alarm
2 = Zone Trouble
3 = Area(s) Arming 7 = Local Message
Zone, Area, or User Number
If this message is for a zone, the 1 to 3-digit zone number
is displayed.
If this message is for areas that are being armed or
disarmed, the area numbers are shown in sequential order.
Example: 1 2 4.
Security Command
Numeric Paging
46
Always Area Always User
Zero Number Zero Number
4 = Area(s) Disarming
5 = Late to Arm
Alphanumeric Pager Display
Account Number
Whenever the system sends a message to your pager, it
will always send the account number Þ rst to identify itself.
After the account, you will see:
Typical Zone Event Display
20002 001 NORTH DOORS
Account Zone Zone Name
Zone Types - BURG, FIRE, SUPV (Supervisory), PANC (Panic), EMRG
(Emergency), AUX1, or AUX2
Events - ALARM or TROUBLE
Typical Arming/Disarming Display
20002 ARMED 0016 BILL SMITH
Account Event
Events - ARMED or DISARMED
Typical System Event Display
20002 LATE TO CLOSE
Account Event
Events - LATE TO CLOSE
closing time)
ALARM CANCELLED
Security Command
Alphanumeric Paging
XR200 User's Guide
BURG *ALARM* SHIPPING
Zone Type Event
01 EAST WAREHOUSE
User # User Name Area # Area Name
(The system has not been armed at its scheduled
(An alarm has been cancelled by an authorized user)
Area Name
Appendix C