Alarm Silence; Sensor Reset - Security Command XR200 User Manual

Hide thumbs Also See for XR200:
Table of Contents

Advertisement

Alarm Silence

User Code Level: 2 and above.
Function: Silences the alarm bell or siren during an alarm.
Alarm Silence allows you to turn off the alarm bell or siren
connected to your system during an alarm. Using Alarm Silence
does NOT stop an alarm report from being sent to the central
station and does not reset any alarmed devices. Use the Sensor
Reset function to reset devices such as smoke detectors that have
latched in alarm.
Using the Alarm Silence Function
1.
Access the User Menu.
2.
The keypad displays ALARM SILENCE?.
3.
Press any Select key to silence the bells and exit the User
Menu.
User Menu

Sensor Reset

User Code Level: 1 and 2 - During schedules only.
Anytime.
Function: Resets smoke or glassbreak detectors. Also clears Fire/
Supervisory alarm and trouble displays.
Sensor Reset is used to reset smoke and glassbreak detectors after
they have been tripped.
they must be reset before they can detect any additional alarm
conditions. When Sensor Reset is selected, power to the detectors
is temporarily removed by the system allowing them to reset.
Make sure all smoke is cleared from around the area of the smoke
detectors before performing a Sensor Reset to prevent the alarm
from occurring again.
Resetting the Sensors
1.
Access the User Menu.
2.
Press COMMAND until SENSOR RESET displays.
3.
The keypad displays SENSORS OFF for Þ ve seconds followed
by SENSORS ON.
4.
The keypad automatically exits the User Menu.
XR200 User's Guide
Once these detectors have tripped,
3 to 9 -
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XR200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents