About The Display Events Section; Arming And Disarming Event Displays; Zone Event Displays - Security Command XR200 User Manual

About the Display Events Section

This section of the User's Guide shows the Display Events items for
32-character keypad displays. While in the Display Events function,
use the COMMAND and Back Arrow keys to go forward or backward
through the list of events.
To view more information about each display, press the Select key
as directed in the explanations below.

Arming and Disarming Event Displays

This displays any arming or disarming of system areas.
16-Character Display
ARM 3 12 1017
32-Character Display
ARM 5:10P 10/ 17
WAREHOUSE
Arming Event Types - There are 2 event types you may see here:
ARM - User armed the system
DIS - User disarmed the system
Appendix A
Appendix A
Description
Area 3 was armed by user 12
on Oct. 17. Press the Select
key under 3 for the area name,
under 12 for the user name, or
under 1017 for the time the
arming occurred.
Description
The area was armed at 5:10
PM. Press any Select key to
display the area number and
user number, and then any
Select key to display the user
name.
XR200 User's Guide

Zone Event Displays

This displays alarms, troubles, and other events that could occur on
your protection zones.
16-Character Display
2 BURG ALR 1017
32-Character Display
ALR 10:23P 10/17
BASEMENT DOOR
Zone Type - There are 7 possible zone types you may see here.
FIRE - Fire PANC - Panic
EMRG - Emergency SUPV - Supervisory
AUX1 - Auxiliary 1 AUX2 - Auxiliary 2
Event Types - There are 7 event types you may see here:
ALR - Alarm TBL - Trouble
LOW - Low battery MIS - Missing wireless transmitter
FLT - Zone Fault SVC - Service smoke detector
Note: LOW and MIS are for wireless systems only.
Description
A burglary alarm occurred on
zone 2. Press the right Select
key for the time the alarm
occurred.
Description
An alarm occurred at 10:23 PM
on Oct. 17. Press any Select
key to see the zone number
and zone type.
BURG - Burglary
RST - Restore
35