Output Schedules - Security Command XR200 User Manual

Output Schedules

The Schedules function allows you to set up to 50 different
scheduled times for relays connected to your system to turn on and
off automatically.
Programming Output Schedules
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays.
3. Press any Select key. The keypad displays PRI TMP OUT or
(PRI SEC OUT). Press the Select key under OUT.
4. At the OUTPUT NO:
number you want to program. Press the COMMAND key.
If adding a schedule and all 50 are currently in use, you will see
an OUT SCHEDS FULL on the display. You must then delete
or change an existing schedule.
5. The keypad displays SUN MON TUE WED. Press the COMMAND
key to display THU FRI SAT.
6. Press the Select key under the day you want to program.
Note: After selecting the day of the week for the schedule to
occur, the keypad displays any currently programmed On
Off times previously set for that day. This feature allows you
to review programmed schedules at any time.
7. If On Off times are displayed, the keypad then displays
DELETE KEEP. Press the Select key under DELETE to enter
new times.
8. The keypad then displays ON TIME?. This is followed by the
display – : AM PM.
Enter a new relay On time and select AM or PM.
The display changes to OFF TIME?. This is followed by the
26
– display, enter the relay output
display – :
Enter a new Off time for the relay.
Enter all schedule times using a 12 hour clock. For example,
to enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the
Select key under AM. For 11 PM you would enter a 1 + 1 + 0
+ 0 and press the Select key under PM.
9. The keypad then goes back to the day of the week displays
allowing you to enter another Output schedule. To exit the
user menu or to go back to the PRI TMP OUT display, press
the Back Arrow key.
10. To clear a schedule, press DELETE and then AM when the
opening time is requested.
List your Opening and Closing schedules in the table provided on
the following page for easy reference.
XR200 User's Guide
AM PM.
User Menu