Honda SH125 Manual page 268

FRONT WHEEL/SUSPENSION/STEERlNG
-
washer-bolt and bracket holder
-
rear brake lever bracket
-
left handlebar grip
Remove the following from the cable guides:
-
brake joint cable
-
throttle cable
-
front brake hose
-
speedometer cable
-
rear brake cable
-
nut and setting collar
-
handlebar
-
setting collar
INSTALLATION
NOTE:
Route the cables and hose properly (page 1-17).
Align the round
Install the handlebar over the steering stem with the
surface of each
front setting collar.
collarproperly
Align the bolt holes and insert the bolt.
Install the rear setting collar and nut, and tighten it.
TORQUE: 39 N-m (4.0 kgf.m, 29 Ibfdt)
-
bolt
Set the following into the cable guides:
-
rear brake cable
-
speedometer cable
-
front brake hose
-
throttle cable
-
brake joint cable