Honda SH125 Manual page 248

CRANKCASE/CRANKSHAFT
Apply engine oil to the timing sprocket and cam
chain.
Install the cam chain onto the timing sprocket.
Apply engine oil to a new oil seal lip and outer sur-
face.
Install a new oil seal squarely until it is flush with
the left crankcase.
Coat a new O-ring with engine oil and install it onto
the cam chain tensioner pivot bolt.
Install the cam chain tensioner slider and pivot bolt,
and tighten the bolt.
TORQUE: 10 N.m (1.0 kgf-m, 7 Ibf-ftl
Install the oil seal stopper plate onto the left crank-
case and tighten the bolts.
Install the following:
-
clutch/driven pulley (page 10-20)
-
drive pulley (page 10-1 1)
-
oil pump (page 4-6)
-
flywheel (page 12-13)
-
starter motor (page 19-1 1)
-
cylinder and piston (page 9-91
-
cylinder head (page 8-21
1
-
engine (page 7-7)