Honda SH125 Manual page 282

REAR WHEEL/SUSPENSION
I NSTALLATI 0 N
Install the rear wheel onto the final shaft, aligning
the splines.
Apply grease to grease groove and bearing fitting
area of the final shaft.
Install the collars into the swingarm.
Install the swingarm onto the final shaft.
Install the swingarm bolts with the washers and
axle nut, and tighten them.
TORQUE: Axle nut: 118 N-m (12.0 kgf-m, 87 IbfW
Set the shock absorber onto the swingarm, and
install the lower mounting bolt and tighten
it.
Install the following:
-
mud guard (page 2-14)
-
exhaust system (page 2-15).
15-7