Honda SH125 Manual page 274

FRONT WHEEL/SUSPENSION/STEERI"
Apply 3
-
5 g of grease to each new steering bearing
and fill it up. Install the lower steering bearing onto
the stem.
Donotgetgrease
Insert the steering stem into the steering head pipe
on
the stern
and install the following while holding the stem:
-
upper inner race (and temporarily tighten it)
threads.
-
upper steering bearing
1. Tighten the upper inner race.
TOOLS:
Lock nut wrench 07SMA-GBC0100
TORQUE: 8 N.m (0.8 kgf.m, 5.9 Ibf-ft)
2. Turn the steering stem left and right, lock-to-lock
several times to seat the bearings.
14-26