Honda SH125 Manual page 227

ALTERNATOWSTARTER CLUTCH
ITEM
Starter driven gear Boss O.D.
Starter clutch outer I.D.
Bushing I.D.
SERVICE INFORMATION
STANDARD SERVICE LIMIT
39.622
-
39.635 (1.5599
-
1.5604)
22.026
-
22.045 (0.8672
-
0.8679)
56.279
-
56.309 (2.2157
-
2.2169)
39.58 (1.558)
22.10 (0.870)
56.36 (2.219)
GENERAL
This section covers the removal and installation of the flywheel, starter clutch and alternatorkrankshaft position (CKP)
sensor.
These service can be done with the engine installed in the frame.
Refer to page 17-8 for alternator inspection.
Refer to page 18-6 for CKP sensor inspection.
SPECIFICATIONS
TORQUE VALUES
Stator bolt
Crankshaft position (CKP) sensor bolt
Starter clutch outer bolt
Flywheel nut
12 N.m (1.2 kgf.m, 9 Ibf.ft)
5 N.m (0.5 kgf.m, 3.7 1bf.R)
30 N.m (3.1 kgfm, 22 Ibf.ft) Apply locking agent to the threads.
116 N.m (11.8 kgfm, 86 Ibf.ft) Apply engine oil to the threads and seating sur-
face.
12-3