Honda SH125 Manual page 259

FRONT WHEEL/SUSPENSION/STEERlNG
Apply grease to a new dust seal lips and install the
dust seal until it is flush with the hub.
Be carefulnot to
Install a new gear retainer into the right side of the
damage the seallip.
hub until it is fully seated.
INSTALLATION
Apply grease to the speedometer gear teeth and
sliding surface, and install the washers and gear.
Apply grease to the dust seal lip, and install the gear
box so the tabs o n the gear and retainer are not
interfered.
Install the side collar.
Be carefulnot to
Place the wheel between the fork legs while insert-
damage the brake
ing the brake disc between the pads in the caliper so
pads.
the lug on the gear box is positioned against the
stopper as shown.
Carefully align the axle holes and insert the axle
from the right side.
14-1 I