Honda SH125 Manual page 234

ALTERNATOR/STARTER CLUTCH
IN STALLATI 0 N
Install the stator and tighten the three socket bolts.
TORQUE:
12 Nmm (1.2 kgf-m, 9 Ibf-ft)
Install the
CKP
sensor and tighten the two flange
bolts.
TORQUE: 5 N.m (0.5
kgf-m, 3.7 Ibf.ft1
Apply sealant to the grommet seating surface and
install it into the right crankcase cover groove prop-
erly.
Install the right crankcase cover (page 12-7).
FLYWH EELBTARTER CLUTCH
REMOVAL
Remove the right crankcase cover (page 12-51,
Remove the starter reduction gear shaft and reduc-
tion gear.
Hold the flywheel with the special tool and loosen
the flywheel nut.
TOOL:
Remove the flywheel nut and washer.
Flywheel holder 07725-0040000
12-10