Honda SH125 Manual page 155

ENGINE REMOVAL/INSTALLATION
Remove the engine mounting nuts, bolt and engine
hanger bracket.
Check the bushings in the engine and hanger
bracket for wear, deterioration or damage.
Check the rubber stoppers on the hanger bracket for
wear, cracks or deterioration.
ENGINE INSTALLATION
NOTE:
Route the wires, hoses and cables properly (page
Install the hanger bracket onto the engine with the
rubber stoppers facing to the right by inserting the
mounting bolt from the left side.
Install the mounting nut. Set the angle of the
bracket as shown and temporarily tighten the nut.
1-17).
7-7