Danfoss Turbocor TT Series Service Manual page 97

Figure 4-73 Ground Post Nuts
6. Install the mains input cables to the Terminal Block and torque to 20 Nm (15 ft.lb.) for TTS300/TGS230
Figure 4-74 Mains Input Installation - TTS300/TGS230 Compressors
Figure 4-75 Mains Input Nut Installation - TTS/TGS/TTH/TGH (Except TTS300/TGS230)
compressors and torque all others to 21 Nm (15 ft.lb.). Refer to Figure 4-74 M ains Input Installation -
TTS300/TGS230 Compressors and Figure 4-75 M ains Input Nut Installation - TTS/TGS/TTH/TGH (Except
TTS300/TGS230).
M-SV-001-EN Rev. H-1/23/2023 Page 97 of 294