Danfoss Turbocor TT Series Service Manual page 201

4. Remove the Motor Bus Bars. Refer to Section 4.23.5 M otor Components Removal and Installation on
5. Remove the Cover Plate. Refer to Section 4.23.5.5 M otor Cover Plate Removal on page 198.
6. For the PPS feedthrough, continue to Step 7. For the stainless-steel style, continue to Step 8.
7. Remove the three (3) M10x16 fasteners and ring terminal connections from the feedthrough in order to
Figure 4-225 High-Power Feedthrough Removal (PPS)
8. Remove the three (3) M10 nuts, lock washers, and ring terminal connections from the feedthrough in
Figure 4-226 High-Power Feedthrough Removal (stainless steel)
page 196.
be able to release feedthrough assembly. Refer to Figure 4-225 H igh-Power Feedthrough Removal
(PPS).
order to be able to release feedthrough assembly. Refer to Figure 4-226 H igh-Power Feedthrough
Removal (stainless steel).
M-SV-001-EN Rev. H-1/23/2023 Page 201 of 294