Danfoss Turbocor TT Series Service Manual page 151

Figure 4-156 -SCR Gate Cable and AC/DC Harness Connections - TTS/TGS/TTH/TGH Rev. F and Earlier (Except TTS300/TGS230)
Figure 4-157 SCR Gate Cable and AC/DC Harness Connections - TTS/TGS/TTH/TGH Rev. H (Except TTS300/TGS230)
3. Remove the AC mains input terminals and bus bars. Refer to Section 4.11.2 3 -Phase Main Voltage Input
4. Remove the Snubber Capacitors from the Inverter. Refer to Section 4.20 S nubber Capacitors on page
5. Disconnect the DC Bus Bar from the SCRs and remove the DC Capacitor Bus Bar Assembly. Refer to
Terminal Block Removal and Installation on page 102.
164.
Section 4.21.3 D C Capacitor Bus Bar Assembly Removal and Installation on page 168.
M-SV-001-EN Rev. H-1/23/2023 Page 151 of 294