Figure 4-203 Motor Winding Sensor Removal
23. Remove the 18 M6x30 fasteners that secure the Inverter to the compressor main housing. Refer to
Figure 4-204 Inverter Removal - TTS/TGS/TTH/TGH (Except TTS300/TGS230)
24. Remove and discard the large Inverter O-ring from the compressor housing. Refer to Figure 4-205
Page 184 of 294 - M-SV-001-EN Rev. H 1/23/2023
Figure 4-204 I nverter Removal - TTS/TGS/TTH/TGH (Except TTS300/TGS230).
Inverter O-ring Removal - TTS/TGS/TTH/TGH (Except TTS300/TGS230) on page 185.