The Assign and Measure modality
In this measurement modality, the user selects a study
consisting in a set of related pre-labelled measurements.
Starting the Assign and Measure
modality
1.
Press
The Measurement Menu is displayed in the Parameters
window (see example Figure 6-2).
The trackball cursor is in the scanning window, ready for
starting measurement.
1. Active application
2. Study
3. Selected study
4. Opened study
5. Measurements related to the
area study for the cardiac
application
Figure 6-1: Example of a measurement study
Vivid i User's Manual
2378958-100 Rev. 02
Measurement and Analysis
on the control panel.
MEASURE
111