Inspecting The Probe - GE Vivid i User Manual

Probes

Inspecting the probe

If any damage is found, DO NOT use the probe until it has been
inspected and released for further use by a GE service
representative.
CAUTION
After each use:
1.
2.
Before each use:
1.
2.
3.
1. Housing
2. Strain relief
3. Seal
4. Lens
Figure 10-3: Probe parts
272
Inspect the lens, the probe housing and the cable
(Figure 10-3.
Look for damage that might allow liquid into the probe.
Inspect the lens, the probe housing and the cable
(Figure 10-3).
Look for damage that might allow liquid into the probe.
Test the functionality of the probe.
Vivid i User's Manual
2378958-100 Rev. 02