Table of Contents
Advertisement
Archiving
DICOM spooler
DICOM spooler displays the current DICOM output jobs. The
jobs may be Storage, Print, Modality Performed Procedure
Step or Storage Commitment. The DICOM spooler is used for
checking the current job's status when a job is saved or when
the total spooler status on the right of the Archive windows
displays an error.
From the DICOM spooler the user can also:
•
•
•
The job's status displayed in the DICOM spooler window can
be:
•
•
•
•
•
•
Starting the DICOM spooler
1.
The DICOM spooler window is automatically updated every
minute. Press Refresh to update the information displayed at
any time.
232
Delete non-active jobs
Resend a job that has failed or is in hold
Send a job that has failed or is in hold, to a new destination.
Pending: the job is complete, waiting to be active.
In hold: the job is incomplete, waiting for more images.
Append: the job is connected to the destination device but
is waiting for more images (Direct store function).
Active: the job is complete and connected to the
destination device.
Failed: the job is complete but one or more images failed to
transmit to the destination device.
Done: the job is saved to the destination device. The jobs
that are done are removed from the spooler after a while.
On the alphanumeric keyboard, press and hold down the
key and press
ALT
S
The DICOM spooler window is displayed (see
Figure 8-66).
.
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
