Table of Contents
Advertisement
The bar in the center of the button graphic changes its length to
reflect the change in the value of the controlled parameter.
An alternative method for modifying the parameter associated
with this button is to click with the mouse pointer on the
relevant area of the button graphic.
Variable Dual parameter button
In this example the button has access to either "Frame Rate"
or "Low Vel. Reject" parameters.
When the "Frame Rate" upper label is highlighted, the
parameter "Frame Rate" can be increased by pressing on the
right-hand area of the circular assignable button and
decreased by pressing on the left-hand area of the button.
When pressing on the bottom area of the button, the bottom
label ("Low vel. Reject" in this example) will be highlighted. In
this case, from now on, pressing the right or left area of the
circular assignable button will either increase or decrease
respectively the value of the lower (highlighted) parameter.
Pressing, at this pont, on the upper part of the circular button
will, again, associate the button with the upper labeled
parameter.
An alternative method for modifying one of the parameters
associated with this button is to click with the mouse pointer on
the relevant area of the assignable button graphic.
Vivid i User's Manual
2378958-100 Rev. 02
Basic scanning operations
51
Advertisement
Table of Contents
