Table of Contents
Advertisement
Measurement and Analysis
Configuration of the Measurement result table
If AV CO calculation is not displayed in the Measurement result
table, follow the following procedure:
1.
2.
3.
4.
136
Press
and select the category Measure.
CONFIG
The Measurement menu sheet is displayed.
The AV CO calculation is based on Doppler AV Trace
measurement in the folder Aortic, check Doppler in the
Measurement menu sheet and select the folder Aortic.
In the folder Aortic, select AV Trace measurement.
A list of all available calculations for the selected
measurement is displayed in the Measurement menu
sheet.
Check the box in front of AV CO.
The AV CO calculation will be displayed in the
Measurement result table.
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
