Table of Contents
Advertisement
Presets and System setup
7.
Adjusting the assigned devices
1.
2.
3.
General settings
Name
IP address
Database Name
File destination
Removable
Image settings
Allow raw data
Max Framerate
Compression
Quality
Allow Multiframe
Connection settings
Retry
316
To remove a device from the dataflow, select the device in
the Selected devices field and press the Left arrow button.
Select the device in the Selected devices field.
Press Properties.
The Properties window is displayed.
Adjust the device specific parameters as desired (see table
below). Not all the settings listed below apply to all devices.
Free text: give a descriptive name for the device.
Select from drop-down menu
Automatically selected according to the IP address
Automatically selected according to the IP address
Check the entry is the media is removable.
: save data in both raw and DICOM format.
: save data in DICOM format only.
Select 25, 30 or Full from the pop-up menu. Full (original
acquisition) is default.
Select compression type or no compression.
Set picture quality from 1 to 100%. A low picture quality
level allows high data compression, while a high picture
quality restrains the compression.
: allow cineloop storage.
Set maximum number of connection tentatives, time
interval between tentatives and time-out.
Definition
Definition
Definition
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
