Table of Contents
Advertisement
Getting started
Connecting to the electrical outlet
The unit's power must be supplied from a separate, properly
rated outlet to avoid risk of fire. Refer to "Power requirements"
on page 9 for rating information.
WARNING
The power cord should not, under any circumstances, be altered
to a configuration rated less than that specified for the current.
Do not use an extension cord or adapter plug.
1.
Connect the AC power adaptor output plug into the
appropriate socket on the rear of the Vivid i.
2.
Ensure that the wall outlet is of appropriate type.
3.
Secure the power plug in the wall outlet.
AC Adapter
Use only the special AC Power adapter for Vivid i, specifically
designed and approved by GE.
CAUTION
Be sure that nothing rests on the AC adapter's power cable and
that the cable is not located where it can be tripped over or
stepped on.
Place the AC power adapter in a ventilated area, such as a desk,
when you use it to run the Vivid i.
Do not cover the AC power adapter with paper or other items
that will reduce cooling; do not use the AC power adapter inside
a carrying case.
Battery
The lithium ion battery provides power when an AC power
source is not available. A battery in the battery bay is standard
with the Vivid i. You can expect one hour of battery life with a
single fully charged battery. Lithium ion batteries last longer
than conventional batteries and do not require replacement as
often.
Note: The battery is
The lithium ion technology used in the system's battery is
designed to work
significantly less hazardous to the environment than the lithium
with Vivid i sys-
metal technology used in some other batteries (such a watch
tems only. Only use
batteries). Used batteries should not be placed with common
the batteries autho-
household waste products. Contact local authorities for the
rized by GE.
location of a chemical waste collection program nearest you.
12
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
