Data Backup And Restore - GE Vivid i User Manual

Archiving
10. Press Done to complete the Disk management operation

Data Backup and Restore

The Backup/Restore function enables the user to:
•
•
To minimize accidental loss of data, perform backup of the
patient archive stored on the local hard drive at least once a
week.
GE Medical Systems is not responsible for lost data if the
suggested backup procedures are not followed and will not aid
DANGER in the recovery of lost data.
There is no backup function for the images or reports (no
creation of a safety copy). For long-term storage, images and
reports should be moved to removable MOD or to a network
shared folder using the Disk management procedure (see
page 220).
DO NOT use the local hard drive for long-term image storage.
CAUTION
The backup of the patient archive on the hard drive and the
system configuration is done from the configuration
management package as described on page 227.
Data from Backup/Restore disks may be restored to the local
hard drive using the Restore procedure as described on
page 230.
Only users with administration rights (see page 331) have
access to the backup/Restore function.
226
label should also have an identification of the system the
Disk management was run from.
and file the media.
Copy/Restore the patient archive.
Copy/Restore the system configuration. The Copy/Restore
system configuration feature enables the user to configure
several units with identical presets, providing that the units
have the same software version.
Vivid i User's Manual
2378958-100 Rev. 02