Table of Contents
Advertisement
Getting started
Moving and transporting the unit
Moving the unit on a Cart
To prepare the unit to be moved
1.
2.
Note the marks on
3.
each cable to recon-
nect them later.
4.
5.
6.
To ensure safety while moving the unit
1.
2.
3.
4.
5.
Avoid ramps that are steeper than 10 degrees.
CAUTION
22
Turn the system OFF either in Standby or Full Shutdown
mode, and remove the AC power plug from the wall outlet.
Fold the LCD screen to the fully closed position.
Disconnect all cables linking the system or peripherals to
any off-board peripheral devices and network.
Secure the unit's power cable on the Cart.
Place all probes securely on the cart. Ensure that the probe
cables do not protrude from the unit or interfere with the
wheels.
Ensure that no loose items are left on the unit
Ensure that the LCD screen is in the locked position.
Proceed cautiously when crossing door or elevator
thresholds. Do not attempt to move the unit using cables or
probe connectors. Take extra care while moving the unit on
inclines.
Ensure that the unit does not strike the walls or door
frames.
Ensure the pathway is clear.
Move the unit slowly and carefully.
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
