Measurement and Analysis
Measure and Assign modality
In this measurement modality, the user performs a
measurement and assign a label.
Only assigned measurements will be saved.
CAUTION
Starting the Measure and Assign
modality
1.
Press
The Measurement Menu is displayed in the Parameters
window (see example Figure 6-3).
2.
Select the Generic study if not already selected, and
trackball to the required measurement tool.
3.
Press
measurement tool.
The cursor is moved back to the scanning window, ready
for measurement.
1.
Measurement tools
Figure 6-3: The 2D Mode Measurement tools (Cardiac application)
114
on the control panel.
MEASURE
on the trackball area to activate the
SET
Vivid i User's Manual
2378958-100 Rev. 02