Table of Contents
Advertisement
Getting started
Figure 1-5: The Exit dialogue window
In case of total lock-
2.
up of the system,
hold the on/off but-
ton down a few sec-
onds to turn the
Standby mode
system off.
1.
In case of total lock-
2.
up of the system,
hold the on/off but-
ton down a few sec-
onds to turn the
system off.
20
Select Shutdown.
The shutdown process takes a few seconds and is
completed when the control panel illumination is turned off.
Press
(on/off button) on the top left of the control panel.
The Exit dialogue window is displayed (Figure 1-5).
Select Standby.
The system enters Standby mode.
The system remains in Standby mode for approximately
XX
hours using the internal battery.
Note: When the system is operating, if the power cable is
removed from the wall outlet or the Power Adaptor is
disconnected from the Vivid i, the system will continue to
operate using the internal battery. When battery power is
reduced below a certain level the system automatically
shuts down into Standby mode.
Eventually, if left for a long time, the system will switch
from Standby mode to full shut-down.
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
