Table of Contents
Advertisement
Basic scanning operations
To Format a removable media
Removable media
1.
used during Disk
2.
space management
3.
or Backup do not
need to be format-
ted; the formatting
4.
process is part of
these procedures.
Figure 2-6: The Tools Sheet
5.
6.
7.
8.
9.
10. Select OK to continue.
11. Eject the media as described below.
62
Insert the media into the drive.
Press
.
CONFIG
If required, log on to the system. The Configuration
package is opened.
Select the category Connectivity and select the sheet
Tools (see Figure 2-6).
Select the removable media from the Media pop-up menu.
Enter a name for the removable media in the Label field.
NOTE: Only the following characters and signs can be
used when labelling a media: A-Z, a-z, 0-9, underscore (_)
and hyphen (-). Do not use more than 11 characters or
signs. Do not use space.
Select Format. A confirmation window is displayed.
Select OK to continue.
Wait for the display of the Information window indicating
that the formatting process is completed.
Vivid i User's Manual
2378958-100 Rev. 02
Advertisement
Table of Contents
