Table of Contents
Advertisement
Running the Disk management function
The Disk management function can be run at any time. In
addition, the user may be prompted to run Disk management if
the time since the last Disk management operation performed
has reached the setting for the Reminder interval (see
page 221), or if the local hard drive is about to reach its
capacity limit.
Disk management manual start
1.
2.
Figure 8-51: The Disk management welcome screen
3.
Vivid i User's Manual
2378958-100 Rev. 02
Press
on the control panel, then select Patient list.
PATIENT
The Search/Create patient window is displayed.
In the Search/Create patient window press More to display
additional menu options and select Disk management.
The Disk management welcome screen is displayed
(Figure 8-51). The Disk management operation either
copies, removes or deletes files from the local archives
depending on the Disk management configuration (see
page 221). Make sure that the correct configuration is set.
Press Next.
The Storage size information window is displayed
(Figure 8-52). Verify the information displayed. If using
removable media, the operation may require several
media as specified on the screen. Make sure to gather the
necessary number of disks.
Archiving
223
Advertisement
Table of Contents
