The Assign And Measure Modality; Starting The Assign And Measure Modality - GE Vivid S5 User Manual

Measurement and Analysis

The Assign and Measure modality

In this measurement modality, the user selects a study
consisting in a set of related pre-labelled measurements.
Starting the Assign and Measure
modality
1.
1. Active application
2. Study
3. Selected study
4. Opened study
5. Measurements related to the
area study for the cardiac
application
Figure 7-1: Example of a measurement study
248
Press on the control panel.
MEASURE
The Measurement Menu is displayed in the Parameters
window (see example Figure 7-2).
The trackball cursor is in the parameter window, ready for
measurement selection.
Vivid S5/Vivid S6 User Manual
R2424458-100 Rev. 2