Table of Contents
Advertisement
1. Data stored only for
the duration of the
current examination
2. Select the operator
Figure 1-13: The Operator login window
3.
4.
Do NOT use '\' or '^' in patient information fields, as these
characters might cause problems with some DICOM devices.
CAUTION
The unit can be con-
figured to automati-
cally generate a
patient ID (see
page 321).
If the Patient name is on the patient record list:
To restrain the
1.
search to special
category of patient
record, press More
and use the search-
ing filters.
If the Patient name is not on the patient record list:
The automatic
1.
search tool display-
ing matching pa-
tient information in
the Patient list can
be turned off (see
page 321).
Vivid i User's Manual
2378958-100 Rev. 02
Press Log on when completed.
The Search/Create Patient window is displayed (see
Figure 1-14).
Type the patient Last Name, and/or ID.
When default configured, the system automatically
searches to see if the patient is already in the database.
The result of this search is displayed in the Patient List
field.
Trackball to the actual patient and double-click the
Trackball
key (or press
SET
patient).
The unit is ready for scanning or the Patient information
window is displayed (Figure 1-15) depending on system
configuration (see page 321).
Press Create Patient.
The unit is ready for scanning or the Patient information
window is displayed (Figure 1-15) depending on system
configuration (see page 321).
Getting started
once and then Select
SET
43
Advertisement
Table of Contents
