Connection Example - Siemens SINAMICS S120 Manual

8.4

Connection example

It is only possible to omit the fuses if the cables to the Voltage Sensing Module are routed so that no short-circuit or
1)
ground fault can be expected under normal operating conditions (short-circuit proof routing).
Tap the line voltage as actual value for the Voltage Sensing Module VSM10 corresponding to the system design, for
2)
example refer to the table.
Use either terminal X521 or terminal X522.
3)
Figure 8-4 Connection example for the VSM10 to measure the line voltage
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Voltage Sensing Module VSM10
8.4 Connection example
221