Terminal Module Tm150; Description - Siemens SINAMICS S120 Manual

6.8

Terminal Module TM150

6.8.1

Description

The terminal module TM150 is a DRIVE-CLiQ component for temperature evaluation. The
temperature is measured in a temperature range from -99 °C to +250 °C for the following
temperature sensors:
• Pt100 (with monitoring for wire break and short-circuit)
• Pt1000 (with monitoring for wire breakage and short-circuit)
• KTY84 (with monitoring for wire breakage and short-circuit)
• PTC (with short-circuit monitoring)
• Bimetallic NC contact (without monitoring)
For the temperature sensor inputs, for each terminal block the evaluation can be parameterized
for 1x2-wire,
2x2-wire, 3-wire or 4-wire. There is no galvanic isolation in the TM150.
The TM150 is mounted in the control cabinet and can be snapped on to a standard mounting rail
(EN 60715).
The TM150 contains the following interfaces:
Table 6-54
Type
DRIVE-CLiQ interfaces
Temperature sensor inputs
Electronics power supply
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Overview of the TM150 interfaces
6.8 Terminal Module TM150
Quantity
2
12
1
Terminal Modules
187