Mounting Simotion D410 On The Mounting Plate - Siemens SIMOTION D410 PN Manual

Disassembling SIMOTION D410
To remove SIMOTION D410 from the power module, the blue release, as shown in the
figure, must be pressed down and SIMOTION D410 tilted forward.
Figure 4-1
4.3

Mounting SIMOTION D410 on the mounting plate

Overview
Using a mounting plate, SIMOTION D410 can be operated on a mounting plate, which
means it is not mounted directly to the power module.
Application examples:
● Offset installation using Control Unit Adapter CUA31/CUA32 (e.g. for reducing the
● Using the SIMOTION D410 without the PM340
SIMOTION D410
Manual, 02/2012
Removing the SIMOTION D410 from the PM340 power module
mounting depth or in order to use additional interfaces on the CUA). The
SIMOTION D410 is snapped on to the mounting plate and connected to the PM340
Power Module via DRIVE-CLiQ using CUA31/CUA32. No more than one Control Unit
Adapter can be connected to the SIMOTION D410.
A SIMOTION D410 snapped on to the mounting plate is operated without the PM340
(e.g. for hydraulic applications).
4.3 Mounting SIMOTION D410 on the mounting plate
Assembling
55