Siemens SINAMICS S120 Manual page 89

Then mount the Control Unit onto the Line Module as shown below.
Table 4-32
1. Mount the Control Unit onto the
Line Module using the 3 support
brackets.
①
Figure 4-16
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Installing the Control Unit on a Line Module using the CU320-2 DP as an example
Opening on the Line Module Chassis for fastening the Control Unit
Mounting a Control Unit on a Line Module, chassis format
2. Push the Control Unit down
onto the support brackets until
it latches into place.
Control Units and operating elements
4.5 Mounting Control Units
3. The front of the mounted Con‐
trol Unit must be flush with the
Line Module.
87