The following diagram shows a typical Weidmüller shield connection clamp for the shield
supports.
①
②
Figure 6-11
NOTICE
Damage or faulty operation due to incorrect shielding or inadmissible cable lengths
If the correct shielding procedures or the permissible cable lengths are not observed, it can
cause damage or the machine may malfunction.
• Only use shielded cables.
• Do not exceed the cable lengths stated in the technical data.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Shield connection terminal, Weidmüller company, type: KLBUE CO1, Article number:
1753311001
Protective conductor connection M4 / 1.8 Nm (15.9 lbf in)
Protective conductor connection and shield support
Terminal Modules
6.4 Terminal Module TM31
143