Dimension Drawing; Installation - Siemens SINAMICS S120 Manual

9.7.5

Dimension drawing

Figure 9-26
9.7.6

Installation

Installation
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latch
into position.
3. Slide the components along the mounting rail to either the left or right up to their final
position.
Control Units and additional system components
Equipment Manual, 06/2020, 6SL3097-5AH00-0BP2
Dimension drawing of the Sensor Module Cabinet SMC40, all data in mm and (inches)
Encoder system connection
9.7 Sensor Module Cabinet-Mounted SMC40
273